![]() If I were to do this again, I’d use the planer to remove the bulk of the epoxy then use a card scraper to flush everything up. I ended up taking too deep of a pass and removed some of the depth of the lettering, which was really frustrating after all that work. and best selection of Nord Keyboard Accessories & Parts at Guitar Center. I let the epoxy cure for about 36 hours, then tried to use my planer to remove the excess epoxy. Nord Music Stand V2 for Nord Electro, Nord Grand, Nord Piano and Nord Stage. I came back with a propane torch and popped any bubbles that had formed in the epoxy, and I did this every 5 minutes for the first 20 minutes and I ended up with a bubble-free pour. 7/2 San Antonio 145Diy Instruments Cheap Guitars Metronome Cigar Box Guitar. ![]() ArtResin is a fairly thin epoxy and is self leveling, so it filled the letters nicely. 1 - 120 of 1,009 2 K&M Performer Guitar Stands for Acoustic & Electric. ![]() I added a little black dye, mixed it for three minutes, then poured it on. I mixed way too much epoxy, but I’ll figure that out with more experience. A-Frame guitar stand Check Price 5 DAddario Guitar Dock Check Price 6 DRS Racks. It has no VOCs, unlike a lot of epoxies I’ve used, so I could pour it on inside. How to Make DIY Rotating Display Stand 360 Turntable LahisTech 201K. I used a product called ArtResin, and I would highly recommend it for this type of application. The World’s Smallest And Cheap DIY Guitar Stand Just 7 of materials and a hacksaw and this simple stand can be yours Sure, an outrageous claim but it has to be close I wanted a small and cheap DIY guitar stand to use at rehearsal, something solid but not industrial strength. Next, I decided to fill the letters with epoxy, just to give them a little extra pop. 1 pieces of 1×4 lumber 10 1 pieces of 1×3 lumber 6 1 1/4 screws, felt paint, glue Tools Safety gloves, glasses Miter saw, jigsaw Chalk line, tape measure, spirit level, carpentry pencil Drill machinery and drill bits Time One Day Building a multi guitar stand Building the vertical legs Build the side vertical supports from 1×6 lumber. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |